Make sure you check all parts and follow the included installation instructions.
Recommended Tools & Supplies:
· Silicone sealant and caulk gun
· Mineral spirits and a clean, lint-free cloth
· Flat head screwdriver
Step 1: Start with a clean countertop, clear of obstructions above & below. American Standard recommends a professional countertop installer to cut the sink opening.
Step 2: Check the fit. The sink must sit properly, and be supported on all four corners.
Step 3: Assemble the screws and clamps. Slide the clamp assembli8es into the U channels, evenly spaced. Turn the clamps in the same direction as the U channel. Hand tighten the screws – do not over tighten!
Step 4: Apply a generous amount of sealant.
Step 5: Carefully lower the sink onto the sealant. Apply firm, even pressure.
Step 6: Loosen each screw. Turn the clamps 90 degrees to catch the countertop bottom. Hand tighten the screws. Do not over tighten!
Step 7: Recheck the sink position.
Step 8: Tighten all screws an additional ¼ turn with the screwdriver.
WARNING: Over tightening could result in improper installation or damage to sink.
Step 9: Wipe away excess sealant.
Step 10: Connect the faucet and drain assembly and you’re all set!
Note: Some of the American Standard sinks can be installed under the counter. We recommend professional installation for under counter mounting.
Subscribe to our Channel:
http://www.bit.ly/AmericanStandardSubscribe
American Standard on Facebook: https://www.facebook.com/AmericanStandardPlumbing
American Standard on Twitter:
Tweets by AMStandard
American Standard on Instagram: https://www.instagram.com/american_standard/
American Standard on Pinterest: https://www.pinterest.com/amstandard
Find More Great Videos from American Standard: https://www.youtube.com/user/AmericanStandard01/featured
Check out our Luxury Bathroom Products at DXV by American Standard:
https://www.youtube.com/user/DXVLuxury/videos