Sink Hole Covers

Make sure this fits by entering your model number.
Fits standard sinks
Includes bolt and wing nut

Make sure this fits by entering your model number.
Stainless steel material prevents rust
For the hole’s size: φ 1.1 ~ 1.7 Inch (28-44mm) & Thickness 0.4 Inch (10mm)

Make sure this fits by entering your model number.
Package includes: 4 x Sink Tap Hole Cover + 4 x Waterproof Gaskets + 4 x Nuts
Diameter: 45mm; Thread diameter: 28mm; Height: 20mm. Convenient to store and doesn’t take up too much space

Make sure this fits by entering your model number.
Serene Valley kitchen sink hole plug NSA100 uses the most durable PP material wrapped by 304 stainless steel plate cover to provide the most rust-resistant performance with a matching color to your stainless steel sink.
Minimal work for installation. Our kitchen sink hole plug NSA100 can be installed onto your stainless steel sink without any tools. Simply hand tighten it up with the screw nut from underneath the sink and the work is done.

Make sure this fits by entering your model number.
Stainless steel face and plastic body prevent rust.
Size: 1.77” width x 0.75” long nipple. Please kindly check its size before buying.

Make sure this fits by entering your model number.
1/2-Inch threaded shank; instruction included
Hides sink holes not being used

Make sure this fits by entering your model number.
BRUSHED STAINLESS STEEL: Our sink plug hole covers are made of stainless steel and plastics, Very durable and not easy to rust,You can use it with confidence.
COVER SIZE: About 1.77×1.77×0.94″. Fit for installing hole Dia: 1.22″ to 1.57″,the thickness of the sink should be less than 0.47 inches

Make sure this fits by entering your model number.
✅Won’t Rust and Tarnish: Meshatty faucet hole cover is made of durable stainless steel and plastic, so please don’t worry about rusting and tarnishing, you can use the faucet hole cover brushed nickel for a long time.
✅So Easy to Use: Put the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for good sealing, doesn’t leak; Simple and generous design, make your kitchen more beautiful.

Make sure this fits by entering your model number.
The sink faucet hole cover is made of stainless steel and plastics, not easy to rust, durable, sturdy
Brushed nickel finish, smooth, hidden kitchen sink hole to prevent water from leaking from the hole

Make sure this fits by entering your model number.
MATERIAL – Our sink plug hole covers are made of stainless steel and PP, very durable
COMPATIBLEBILITY – Our sink tap hole cover is the standard size for most households; Suitable for hole sizes between 1.2 to 1.6 inches, the thickness of the sink should be less than 0.4 inches

Make sure this fits by entering your model number.
The faucet hole cover can be applied to faucet hole diameter of 1.2 to 1.6 inch, thickness of sink should be less than 0.4 inch; There is no need any tools to install it
faucet hole cover keep the kitchen clean and tidy by preventing water from leaking onto the floor. Brushed nickel finish, smooth surface, simple and generous design, make your kitchen look consistent.

Make sure this fits by entering your model number.
Practical and Simply Beautiful: the faucet hole cover keep the kitchen clean and tidy by preventing water from leaking onto the floor. Brushed nickel finish, smooth surface, simple and generous design, make your kitchen look consistent.
Stainless Steel: this faucet hole cover is made of durable stainless steel and plastic, you needn’t to worry about rusting and tarnishing, which can be last for a lifetime.

Make sure this fits by entering your model number.
Stainless steel material prevents rust
For the hole’s size: φ 1.1 ~ 1.7 Inch (28-44mm)

Make sure this fits by entering your model number.
Note:For the hole’s size: φ 1.2 ~ 1.6 Inch (30-40mm), Please check its size before buying
Material: 304 Stainless Steel and plastic, Stainless steel material prevents rust

Make sure this fits by entering your model number.
Material: our sink faucet hole cover is made of durable stainless steel and plastic, you needn’t to worry about rusting and tarnishing, which can be last for a lifetime.
Advantages: quick and easy installation without any tools, just pass the cover through the faucet hole, then under the sink, tighten the bottom screw. It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn’t leak. Simple and generous design, make your kitchen look beautiful.

Make sure this fits by entering your model number.
PACKAGE: 2x Faucet Hole Covers, panel diameter is 45 mm / 1.8 inch, height is 22 mm / 0.87 inch, bottom diameter is 28 mm / 1.1 inch, suit for most kitchen sink tap hole.
HOLE SIZE: Sink Hole Cover is suitable for hole diameter between 1.2 to 1.6 inch, sink thickness up to 10 – 12 mm / 0.4 – 0.47 inch, please check the size before purchasing.

Make sure this fits by entering your model number.
Size: Approx.45x21mm/1.77×0.82 inches.
Material: Made of stainless steel and PP.

Make sure this fits by entering your model number.
Material: this sink faucet hole cover is made of durable stainless steel and plastic,don’t need to worry about rusting.
Easy to install: just pass the cover through the faucet hole,then get underneath the sink to tight the bottom screw;quick and easy installation without any tools.Comes with a rubber gasket for a good sealing, doesn’t leak.

Make sure this fits by entering your model number.
BRUSHED STAINLESS STEEL – Our sink plug hole covers are made of stainless steel and plastics, Very durable and not easy to rust,You can use it with confidence.
COVER SIZE – About 1.37 X 0.59″. Fit for installing hole Dia: 0.98″ to 1.18″,the thickness of the sink should be less than 0.4 inches

Make sure this fits by entering your model number.
Covers unused sink faucet holes
Snap-in design

Make sure this fits by entering your model number.
This faucet hole cover is made of durable stainless steel and plastic, you needn’t to worry about rusting and tarnishing, which can be last for a lifetime
Faucet Hole Covers Size: 4.5 x 2.2 cm/ 1.77 x 0.9 inch,Fit for installing hole Dia: 1.22″ to 1.57″,the thickness of the sink should be less than 0.47 inches.(we mandate that you measure the bowl dimension of your sink before purchasing)

Make sure this fits by entering your model number.
BRUSHED STAINLESS STEEL – Our sink plug hole covers are made of stainless steel and plastics, Very durable and not easy to rust,You can use it with confidence.
COVER SIZE – About 1.77 x 0.39″. Fit for installing hole Dia: 1.22″ to 1.57″,the thickness of the sink should be less than 0.4 inches

Make sure this fits by entering your model number.
The cover is made of 304 stainless steel, and the bottom of the cover is made of ABS plastic, which is not easy to break.
Can prevent decoration and leakage, keep the kitchen clean and tidy, prevent water leakage to the floor, is a useful kitchen accessories.

Make sure this fits by entering your model number.
The Product Is Easy To Use
The Product Is Highly Durable And Handle

Make sure this fits by entering your model number.
Stainless steel: this faucet hole cover is made of durable stainless steel and plastic, you needn’t to worry about rusting and tarnishing, which can be last for a lifetime
Easy to install: just put the cover across the faucet hole, then get underneath the sink to tight the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for a good sealing, doesn’t leak

Make sure this fits by entering your model number.
1 – The sink tap cover is very useful to keep kitchen clean and tidy by preventing water from leaking onto the floor. Very good kitchen accessory.
2 – Standard size covers, fit for most households. But please check the size before placing an order.

Make sure this fits by entering your model number.
Applicable faucet size: Please check its size before buying. This size is suitable for holes between 1.1 and 1.7 inches. The thickness of the sink should be less than 0.25 inches. Most household tap hole covers are standard sizes.
High quality: The faucet hole cover is made of durable stainless steel and plastic, which is durable and will not rust and lose luster.

Make sure this fits by entering your model number.
So Easy to Use: Put the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for good sealing, doesn’t leak; Simple and generous design, make your kitchen more beautiful.
Won’t Rust and Tarnish: Meshatty faucet hole cover is made of durable stainless steel and plastic, so please don’t worry about rusting and tarnishing, you can use the faucet hole cover brushed nickel for a long time.

Make sure this fits by entering your model number.
Faucet Deck Plate: Durable stainless steel construction, ,ensuring quality and longevity, brushed stainless steel finish.
3Hole Cover Plate: 10” deck plate enough to cover all the unused 2 or 3 outer holes of your kitchen sink. Resists scratches, corrosion and tarnishing.

Make sure this fits by entering your model number.
Won’t Rust and Tarnish: Meshatty faucet hole cover is made of durable stainless steel and plastic, so please don’t worry about rusting and tarnishing, you can use the faucet hole cover brushed nickel for a long time.
So Easy to Use: Put the sink hole cover stainless across the faucet hole, then under the sink, tighten the bottom screw; It covers the spray hole, no need tools, comes with a rubber gasket for good sealing, doesn’t leak; Simple and generous design, make your kitchen more beautiful.