BESTILL Sink Top Garbage Disposal Air Switch Kit with Dual Outlet, UL Listed, Brushed Nickel Long Push Button

Feature1: 304 Stainless Steel Cover

• 304 Stainless Steel cover. Unlike stainless steel, this high grade quality material is more sturdy, Anti-Rust, Wear Resistance and Waterproof.
• Exquisite surface process, looks more beautiful and luxury, enhance the overall appearance on your kitchen.

Feature2: 3-Inch Extended Body

• Allows you to install on thicker Countertop with ease(but thinner than 2-1/5-Inch).
• Two rubber garkets, prevent water from flowing into the bottom of sink
• The screw plug has a small hole for discharging water that has accidentally flowed into the push button.

Feature3: Power Module with 3-1/3-Inch Power Cord

• UR Certified, Electrical Rating: 22A, 125/250VAC, can drive more horsepower disposers(3 HP).
• Fits any brand or model of food waste disposers,perfectly well for Insinkerator, Waste King, Moen, GE, Kitchen Aid, Whirlpool, Waste Maid, Emerson, Goplus, Frigidaire, Yescom, BECBAS and so on.
• With unique dual outlet design, one outlet is used to control the food waste disposer by air switch, while the other for hot water dispenser or dishwasher is directly powered.

Feature4: 5-Feet Air Hose

• Comes with 5-Feet Air Hose, so you no longer worry about the Air Tubing is not long enough.
• Silicone air hose is more durable.

Step1: Mount the push button

• Mount the push button directly through a standard sink hole.
• If no sink hole, recommend to drill a 1-3/8-inch diameter hole and mount the push button through thick countertop(but thinner than 2-1/5-inch)
• Place the rubber gasket between push button and the top of sink counter.
• Tighten the plastic nut under the sink counter to ensure a watertight seal.

Step2: Aittch Air Tube

• Attach air tubing between push button and power module.
• Push the tubing tightly onto the molded protrusions

Step3: Plug into Power Module

• Plug power module into a dedicated grounded 220V/120V AC outlet that is continuously energized.

• NOTE:
• With unique dual outlet design, one outlet is used to control the food waste disposer by air switch, while the other for hot water dispenser or dishwasher is directly powered.

Step4: Connect Power Module and Disposer

• Plug disposer power cord into power module
• Be sure that the control system is operating properly before using the unit.
• Press and release the air switch button to turn the disposer on. Press and release again to turn the disposer off.
• NOTE: Disposer may start when the disposer power cord is plugged into the power module. Push the air switch button once to stop the disposer.